Fujitsu Printer FTP 607 User Manual

24 V DRIVE, FTP-607 SERIES  
HIGH SPEED THERMAL PRINTER  
3-INCH TYPE MECHANISM  
FTP-637MCL103  
OVERVIEW  
The FTP-607MCL Series thermal printer (driven by 24VDC)  
provides ultra-high speed printing (80mm/s) for 2-inch and 3-  
inch wide paper. Our original platen removal mechanism  
allows easy paper loading and maintenance.  
The FTP-607 MCL series can be used for a variety of  
applications, such as POS/ECR, Kiosk terminals, ticket  
issuing terminals, label printers, banking terminals, and  
measurement and medical equipment.  
HIGHLIGHTS  
• Compact size  
Height 15.5 mm, width 70.4 mm, depth 33.0 mm for the 2  
inch model. The 3-inch product has a width of 92.4mm.  
High speed printing  
It can print at 100 mm/s (800 dotlines/s) maximum by  
using Fujitsu's unique head drive control.  
Easy loading mechanism (ELM) type  
Our unique platen removal mechanism improved paper  
loading and maintenance.  
Multi-featuring diecast fame  
By application of multi-featuring diecast frame, continous  
print by function of heat-sink, high ESD stand by function  
of earth frame and shock/vibration stand by function of  
solid frame are valid.  
• High resolution printing  
8 dots/mm of resolution printing is possible.  
1
 
FTP-637MCL103  
SPECIFICATIONS  
Specification  
Item  
FTP-637MCL103  
Conforms to RS232C / Centronics  
Interface  
24 VDC ±5%, 1.5 A average, 2.2 A peak  
(print ratio: 25%)  
For print head  
Operating  
Voltage  
For motor  
24 VDC ±5%, 1 A maximum  
For logic  
5 VDC ± 5%, 0.5 A maximum  
92.4 x 33.0 x 15.5 mm (WxDxH)  
70 x 60 x 24 mm (WxDxH)  
Approximately 52g  
Printer mechanism  
Interface board  
External  
dimensions  
Weight  
Life  
Pulse resistance: 5x 108 pulses/dot (under our standard  
conditions). Abrasion resistance: paper traveling  
distance 50km (print ratio: 25% or less)  
Head  
Operating temperature  
Operating humidity  
Storage temperature  
Storage humidity  
0˚ C to +50˚ C*1  
20 to 85% RH (no condensation)  
-20˚ C to +60˚ C (paper not included)  
5 to 95% RH (no condensation)  
Operating  
environment  
Head temperature  
detection  
Detected by thermistor  
Detection  
function  
Paper out/mark detection Detected by photo-interrupter  
Platen release detection Detected by slide switch  
Recommended thermal sensitive paper FTP-030PU001(80mm)  
*1: printing density assurance range, operation is possible at -0˚C to +40˚C  
3
 
FTP-637MCL103  
DIMENSIONS  
1. Printer mechanism  
FTP-637MCL103  
center of paper  
87.8  
80.0  
35(paper end sensor)  
10.7  
15.5  
4.6  
44.7  
86.7  
87.6±0.1  
Unit: mm  
2 Interface board  
41.0  
30  
1
CN3  
CN8  
CN5  
CN1  
CN2  
CN7  
CN6  
1
6
3
1
8
1
17.5  
35.5  
51.0  
3.3  
63.5  
3.3  
Unit: mm  
70.0  
4
 
FTP-637MCL103  
CONNECTOR PIN ASSIGNMENT OF MECHANISM (FPC)  
1. Thermal Head  
Part number  
:
52610-3090 Molex or equivalent  
FTP-637MCL103 PIN ASSIGNMENT  
Signal  
PHK  
I/O Contents  
No  
1
I
Photointerruptor (Cathode)  
2
VSEN  
PHE  
SW  
SW  
VH  
Ground power supply for paper sensor  
Photointerruptor (Emittor)  
Platen open switch  
3
O
I
4
5
Platen open switch  
6
7
VH  
I
Power supply for thermal head  
8
VH  
I
9
DI  
I
Print data in  
10 STB3  
11 STB4  
12 VDD  
13 GND  
14 GND  
15 GND  
16 GND  
17 GND  
18 GND  
19 TM  
I
Print enable 3  
Print enable 4  
Power for logic  
I
I
O
I
Ground power supply for thermal head  
Thermistor  
Print enable 1  
Print enable 2  
Print data latch  
Clock  
20 STB1  
21 STB2  
22 LAT  
23 CLK  
24 VH  
I
I
I
I
I
I
I
I
I
25 VH  
Power supply for thermal head  
26 VH  
27 MT/A  
28 MT/A  
29 MT/B  
30 MT/B  
Stepping motor excitation signal  
5
 
FTP-637MCL103  
Europe  
Japan  
Fujitsu Components Europe B.V.  
Diamantlaan 25  
2132 WV Hoofddorp  
Netherlands  
Fujitsu Component Limited  
Gotanda-Chuo Building  
3-5, Higashigotanda 2-chome, Shinagawa-ku  
Tokyo 141, Japan  
Fujitsu Components  
International  
Headquarter  
Offices  
Tel: (31-23) 5560910  
Fax: (31-23) 5560950  
Tel: (81-3) 5449-7010  
Fax: (81-3) 5449-2626  
Asia Pacific  
North and South America  
Fujitsu Components America, Inc.  
250 E. Caribbean Drive  
Sunnyvale, CA 94089 U.S.A.  
Tel: (1-408) 745-4900  
Fujitsu Components Asia Ltd.  
102E Pasir Panjang Road  
#04-01 Citilink Warehouse Complex  
Singapore 118529  
Tel: (65) 6375-8560  
Fax: (1-408) 745-4970  
Fax: (65) 6273-3021  
© 2004 Fujitsu Components America, Inc. All company and product names are trademarks or registered  
trademarks of their respective owners. Rev. 11/15/2004.  
6
 

Dynex TV Video Accessories DX WD1335 User Manual
Echo Hair Clippers HCA 260 User Manual
EDGE Tech Automobile Parts 20200 User Manual
Exmark Lawn Mower Lazer Z XP User Manual
Fiesta Gas Grill EZT40040 P413 User Manual
Fisher Price Cell Phone X14969 User Manual
Furuno SONAR CH270 User Manual
Garrett Metal Detectors Radar Detector GTAx 550 User Manual
GE Ice Maker GBS20KB User Manual
GE Refrigerator 197D3351P003 User Manual