Euro Pro Lawn Sweeper V1725H User Manual

Cordless Sweeper  
OWNER’S MANUAL  
Model : V1725H  
4.8 Volt DC  
For information or assistance:  
EURO-PRO Operating LLC Operating LLC  
94 Main Mill Street, Door 16  
Plattsburgh, NY 12901  
Tel: 1 (800) 798-7398  
 
IMPORTANT SAFEGUARDS  
Care and Maintenance  
To improve the performance and life of your unit, we recommend you  
do the following:  
When using an electrical appliance, basic safety precautions should always be observed,  
including the following  
1. Once a month clean the unit with a dry cloth, including the chamber  
which the dust container fits into. Remove any hair, fiber or other  
materials that may have built up in the chamber, on the rotating brush.  
2. Don’t use abrasive materials to clean the sweeper. Do not immerse the  
unit in water.  
RWEADAARLL NINSITNRUCGTIO:NTSo BreEdFuOceRtEheUrSisIkNGof YfirOeU, eRleCctOriRcaDlLsEhoScSk,SoWr iEnEjuPryE:R.  
1. Do not charge this unit outdoors.  
2. Do not use outdoors or on wet surfaces.  
3. Do not pick up liquids or use on wet floors.  
3. Do not allow to be used as a toy. Close attention is necessary when used by or near  
children.  
4. Do not use on concrete, tar or similar rough surfaces .  
5. Don’t pick up pieces of string or fabrics with the sweeper.  
6. Do not clean tasseled or frayed carpets with the sweeper.  
7. Any other servicing should be done by an authorized service  
representative.  
4. Use only as described in this manual. Use only manufacturer’s recommended  
attachments.  
5. Do not use with damaged cord or plug. Do not use cordless sweeper if it has  
been dropped, damaged, left outdoors, or dropped in water. Return it to EURO-PRO  
Operating LLC for examination, repair or adjustment.  
6. Do not abuse the charger cord. Never carry the charger or base by the cord or yank to  
disconnect from an outlet; instead grasp the charger and pull to disconnect.  
7. Keep charger cord away from heated surfaces.  
TROUBLESHOOTING GUIDE  
8. This product includes rechargeable nickel cadmium batteries. Batteries must be  
recycled or disposed of properly. Do not incinerate batteries or expose to high  
temperatures, as they may explode.  
PROBLEM  
POSSIBLE REASON  
POSSIBLE SOLUTION  
9. Do not handle plug or appliance with wet hands.  
1. Batteries discharged.  
2. No power in electrical  
outlet supplying charging  
adapter.  
3. Unit needs servicing.  
4. Battery misplaced.  
1. Charge unit.  
10. Do not put any object into openings. Do not use with any opening blocked; keep free of  
dust, lint, hair and anything that may reduce air flow.  
11. Keep hair, loose clothing, fingers, and all parts of body away from openings and  
moving parts.  
12. Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot  
ashes.  
2. Check fuse or breaker.  
Replace fuse/reset breaker.  
3. Call Customer Service.  
4. Match “+” on battery to  
compartment “+”.  
SWEEPER WILL NOT  
OPERATE  
13. Do not attempt to change accessories while unit is running.  
14. Use extra care when cleaning on stairs.  
15. Do not use to pick up flammable or combustible liquids such as gasoline or use in  
areas where they may be present.  
SWEEPER WILL NOT  
PICK-UP  
1. Dust container is full.  
2. Unit needs recharging.  
1. Empty dust container.  
2. Charge unit.  
16. Read and follow all label, operational and marking instructions.  
17. Do not use charger with an extension cord. Plug charger directly into an electrical  
outlet. Use charger only in a standard (120V., 60Hz) electrical outlet.  
18. Do not use the cordless sweeper without dust container in place.  
19. Store the cordless sweeper indoors. Store after use to prevent accidents.  
20. Leaks from battery cells can occur under extreme conditions. If the liquid, which is 20-  
35% solution of potassium hydroxide, gets on the skin - wash immediately with soap  
and water or neutralize with a mild acid such as lemon juice or vinegar. If the liquid  
gets into the eyes, flush them immediately with clean water for a minimum of 10  
minutes and seek medical attention.  
DUST ESCAPING  
FROM SWEEPER  
1. Dust container is full.  
1. Empty dust container.  
1. Check for excessive material  
on brush or in bottom of  
sweeper. Remove obstruction  
from brushes and/or sweeper.  
2. Empty and clean dust  
container.  
ROTATING BRUSH  
WILL NOT PICK UP  
1. Unit clogged.  
2. Dust container is full.  
21. Use only on dry, indoor surfaces.  
22. Do not use for any purpose other than described in this user’s guide.  
23. Do not attempt to use the charger with any other product or attempt to charge this  
product with another charger. Use only charger model TechWorld  
AD-0815-U8 supplied with this appliance.  
1. Electrical outlet not  
working.  
2. Charging Adapter not  
working.  
3. Batteries no longer  
functioning.  
4. Unit left in on position.  
1. Check to ensure outlet is  
working properly. (Easily  
checked by plugging in  
SWEEPER WILL NOT  
CHARGE  
another appliance.  
24. The appliance must be disconnected from the supply when removing the battery.  
2. Replace charging adapter.  
3. See battery disposal pg. 7.  
4. Press switch to “Off”.  
SAVE THESE INSTRUCTIONS  
FOR HOUSEHOLD USE ONLY  
8
Rev. 07/04  
1
 
Battery Removal & Disposal  
NOTE: If uncertain as to how to remove your battery pack, we  
suggest you take your sweeper to a reputable small  
appliance service technician to have this service performed.  
Follow these steps when battery removal is required.  
This sweeper is equipped with Ni-Cd batteries and you need to dispose of them  
properly. When the batteries are no longer good for use, they must be removed from  
the sweeper for disposal. Do not remove the batteries for any reason other than  
disposal of them. Call your nearest recycling center for information on the  
recycling and disposal of Ni-Cd batteries.  
Model: V1725H  
4.8 Volt DC  
WARNING: You must never use ordinary batteries for replacement  
as these may leak and cause damage. Use only  
battery pack X9725H provided by EURO-PRO  
Operating LLC for replacement.  
Removal of Battery Pack  
1. Remove the extention handles and dust cup container.  
2. Turn unit over so that the base is facing upwards. Be careful not to turn the unit  
ON. (Fig. 9)  
3. Push in locking tab and lift off battery compartment cover. (Fig. 10)  
4. Lift out battery pack and set aside.  
5. Insert the new battery pack into unit, ensuring that the Positive (+) terminal of  
the battery pack corresponds with the positive (+) making inside the battery  
compartment. Replace the battery compartment cover making certain that the  
locking tab snaps in place.  
IMPORTANT: This appliance contains Ni-Cd batteries. The batteries  
must be recycled or disposed of in accordance with local  
regulations. Please consult your Yellow Pages or local  
recycling center for more information.  
Locking  
Tab  
1. Sweeper Power Head  
7. Charging Jack  
2. On / Off Switch  
8. Lower Handle  
3. Charging Light Indicator  
4. Dust Cup (Container)  
5. Rotating Brush  
9. Metal Extension Handles  
10. Upper Handle  
11. Charging Adapter: Use Only  
TechWorld AD-0815-U8 7,5V-150mA  
6. Transparent Brush Cover  
Illustrations may differ from actual product.  
Fig. 9  
Fig. 10  
NOTE: Cordless Sweeper Model V1725H is shipped with the  
batteries uncharged. Charging of the unit for 20 hours  
prior to first use is required. Use replacement battery  
# X9725H only.  
7
2
 
CHARGING THE CORDLESS SWEEPER  
ASSEMBLING YOUR CORDLESS SWEEPER  
Before you start:  
1. Connect the charger plug to the charging jack or hole on the back of the  
sweeper. Plug the the charging adapter into the wall outlet. (120V., 60Hz.) Use only  
TechWorld Charger AD-0815-U8. (Fig. 8)  
Your Cordless Sweeper will require very little assembly. You should remove it  
from the carton and familiarize yourself with all the components listed per the  
exploded view drawing (pg.2) This will help you in the assembly and operation of  
your cordless sweeper.  
2. This cordless sweeper is powered by Ni-Cd batteries. Before first use,  
they must be charged for a minimum of 20 hours.  
3. When recharging the unit, the "On/Off" switch must be in the "OFF" position.  
4. The charging light indicator on the top of the sweeper will illuminate to indicate that  
the sweeper is properly charging.  
Note: The charging adapter is shipped inside the dust cup.  
5. To recharge, repeat step #1 above. Charging times will vary depending upon  
Lower  
Handle  
the amount of usage between charging cycles.  
Captive Nut  
Bolt  
Fig. 1  
1. Insert the lower handle. Fasten it with the captive nut and bolt that is provided.  
(Fig. 1)  
Fig. 8  
2. Assemble the metal extension handles by pushing the plastic insert into the mating  
metal tube. Push until only small portion of insert is visible or you cannot press any  
farther into the tubing. Push the handle assembly into the upper handle.  
NOTE: One metal extension tube has a different plastic insert. This tube should  
be on the bottom of the handle.  
NOTE: If, when you place the sweeper to recharge and the charging indicator  
light does NOT illuminate, then press the On/Off button once to turn the  
sweeper off. The charging indicator light should now light up.  
Insert the handle assembly into the lower handle so that the tab on the plastic  
insert snaps into the open slot on the lower handle. (Fig. 2)  
NOTE: Peak performance may only be realized after the unit has been  
charged and discharged two (2) or three (3) times.  
Insert into Lower  
Handle  
IMPORTANT: To maintain peak performance of your cordless sweeper, it is  
recommended that the unit be fully discharged, then  
completely re-charged at least once a month.  
CAUTION  
Use only with the battery pack supplied with the unit.  
Do not attempt to remove the battery pack from the unit to charge it.  
Never attempt to throw the battery pack or unit into a fire or incinerate it.  
Do not attempt to remove or damage the battery casing.  
Fig. 2  
Battery must be recycled or disposed of properly at the end of it's service life.  
3. Place the handle into the upward storage position.  
STORING THE CORDLESS SWEEPER  
4. Plug the charging adapter into the sweeper power head charging jack. Plug  
the charging adapter cord into a standard electrical outlet (120V, 60Hz.)  
The green charging indicator should illuminate. If it does not, depress the  
On/Off switch one time.  
Your cordless sweeper may be stored by using the slot on the back of the upper  
handle and hanging it from a screw secured to a wall or other vertical surface.  
Use a #6 flat or pan head screw with the appropriate hardware for the surface  
that the sweeper will be mounted on, (i.e. gyproc). Allow the screw head to  
extend a approximately 3/16" from the mounting surface. Always empty your  
sweeper before hanging up for storage.  
CAUTION: ALWAYS USE ADAPTOR SUPPLIED (ONLY)  
WITH SWEEPER  
6
3
 
CLEANING THE DUST CONTAINER  
To achieve the best performance, empty the dust container after each use.  
1. Pull the dust container straight out from the side. (Fig. 5)  
HOW TO OPERATE YOUR CORDLESS SWEEPER  
1. Before using, please ensure that the cordless sweeper  
has been initially charged for 20 hours.  
Your cordless sweeper will only operate properly when the batteries are fully  
charged. Your sweeper will operate for varying lengths of time on a full charge.  
This will depend upon the type of surface being cleaned. (Longer operating time on  
bare floors vs carpets.)  
2. Push the On/Off switch to operate the unit. To turn off, press switch again. (Fig.3)  
"On/Off" switch  
Fig. 5  
2. Empty dust container contents. (Fig. 6) If desired- you may rinse with water to  
clean the dust container - but dry thoroughly before replacing on the sweeper.  
Fig. 3  
CAUTION: Any electronic or electrical appliance should  
not be stored in or exposed to areas of high  
heat or humidity. Do not store your cordless  
sweeper close to stoves, radiators, furnaces  
or in a bathroom or bathing area.  
Fig. 6  
3. To release the handle to a comfortable position, apply pressure to the top of  
the sweeper head with your foot while pulling back on the handle. (Fig. 4)  
3. Replace dust container on cordless sweeper.  
4. Periodically remove the transparent brush cover on the front of the cordless  
sweeper and remove any build up of lint, hair or fiber on the rotating brush. To  
remove the cover - grip the cover from the bottom, pull out and upward until  
the cover unlocks from the side slots and tabs located on the top of the  
sweeper. (Fig. 7)  
Fig. 7  
Fig. 4  
CAUTION: Do not accidentally turn unit on while cleaning.  
Do not clean while unit is charging.  
4
5
 

Eclipse Fujitsu Ten Car Speaker Speaker 512 User Manual
Eiki Projector LC SD10 User Manual
Euro Pro Food Processor FP86 User Manual
Freecom Technologies Computer Drive XS 30 User Manual
Fujitsu Scanner fi 4110EOX2 User Manual
Fujitsu Scanner M3096EX User Manual
GE Dishwasher GDWF100 User Manual
Gemini Stereo Amplifier pmx 7 User Manual
GE Monogram Dishwasher 49 55086 User Manual
GE Monogram Microwave Oven ZEM200WV User Manual