Euro Pro Iron IR412 User Manual

Model IR412  
LIMITED WARRANTY  
EURO-PRO Operating LLC warrants this product to be free from defects in material and  
workmanship for a period of one (1) year from the date of purchase. The liability of EURO-PRO  
Operating LLC is limited solely to the repair or replacement of the product at EURO-PRO’s option.  
This warranty does not cover damage caused by misuse, negligence, use on improper current or  
voltage, use contrary to operating instructions or disassembly, repair or alteration by any person  
other than EURO-PRO Operating LLC.  
OWNER’S MANUAL  
Retractable Cord Iron  
Model IR412  
Product repair or replacement, at our option, is your sole remedy. This warranty excludes all other  
legal and/or conventional warranties. The responsibility of EURO-PRO Operating LLC, if any, is  
limited to the specific obligations expressly assumed by it under the terms of the limited warranty.  
In no event is EURO-PRO Operating LLC liable for incidental or consequential damages of any  
nature whatsoever. Some States do not permit the exclusion or limitation of incidental or  
consequential damages, so the above may not apply to you. This warranty gives you specific  
legal rights which vary from state to state.  
1400 Watts  
If you have a claim under this warranty or if you require service  
DO NOT RETURN THIS PRODUCT TO THE STORE!  
Send the product , postage prepaid to:  
In U.S.A.: EURO-PRO Operating LLC  
21 Lawrence Paquette Ind. Dr.  
Champlain, NY 12919  
Tel: (800) 798-7398  
Please include a copy of your sales receipt, $9.50 to over the cost of return shipping &  
handling and a letter explaining the nature of your difficulty. Do not forget to enclose your  
name, address and telephone number.  
If the warranty period has expired, please send your iron postage pre-paid to:  
In U.S.A.: Service Department  
EURO-PRO Operating LLC  
21 Lawrence Paquette Ind. Dr.  
Champlain, NY 12919  
Tel: (800) 798-7398  
You will be advised of the cost of repair before any servicing is done unless you enclose a  
note indicating that you would like us to proceed with the repairs and return the iron to you  
C.O.D.  
PRODUCT REGISTRATION CARD  
Please complete and return within ten (10) days of purchase. The registration will enable us to  
contact you in the event a product defect is discovered. By returning this card you acknowledge  
to have read and understood the instructions for use, and warnings set forth in the  
accompanying instructions.  
RETURN TO: EURO-PRO Operating LLC, 21 Lawrence Paquette Ind. Dr., Champlain, N.Y. 12919  
PURCHASER: ……………………………………………………………………………………………  
ADDRESS: ……………………………………………………………………………………………….  
For information or assistance:  
USA: EURO-PRO Operating LLC  
21 Lawrence Paquette Industrial Drive  
Champlain, NY 12919  
Model IR412  
DATE OF PURCHASE: …………………….. MODEL: ………………. SERIAL NO: .…………….  
NAME AND ADDRESS OF STORE: …………………………………………………………………..  
Tel.: 1-800-798-7398  
Printed in China  
 
IRONING CHART  
ADDITIONAL IMPORTANT SAFEGUARDS  
1. Do not rest iron on soleplate.  
9. CAUTION: Never use scouring  
NOTE: Before starting to iron delicate  
To select iron temperature, align  
temperature selected on dial with  
the indicator on the water tank.  
pads, abrasive or chemical  
cleaners, or solvents to clean the  
exterior or soleplate of your iron.  
Doing so will scratch and/or  
damage the surface.  
2. Never use or rest iron on an  
unstable surface.  
fabrics, it is best to first test the  
temperature of the iron on a hem or an  
inside seam.  
3. While the iron is hot, never set iron  
on an unprotected surface - even if it  
is on its heel rest.  
10.WARNING! DO NOT aim iron at  
face, towards yourself, or anyone  
else while using or adjusting  
steam. Burns or serious injury  
may occur.  
11.Never store your iron face down,  
even the smallest amount of  
moisture will cause the soleplate to  
corrode and stain.  
4. WARNING! TO PREVENT  
ELECTRIC SHOCK OR OTHER  
INJURY, before filling the iron  
with water, make sure that the  
plug is removed from the outlet.  
DIRECTIONS  
ON LABEL  
5. CAUTION: Never fill the iron with  
fabric conditioner, starches or any  
other solution, as these will  
SYNTHETIC  
FIBERS, e.g.  
acrylic, nylon  
polyester  
SILK  
COTTON  
LINEN  
FABRIC  
damage the steam mechanism. Do  
not use contaminated water.  
WOOL  
12.DANGER! Never use the iron if it  
is damaged or dropped. Using the  
iron when it is damaged could  
create the risks of fire, electric  
shock, injury or death.  
6. WARNING! TO AVOID FIRE, never  
leave iron unattended while it is  
plugged in.  
TEMP.  
MIN  
MAX  
7. WARNING! TO PREVENT  
ELECTRIC SHOCK, never  
immerse the iron in water or other  
liquid.  
CONTROL  
• • • • •  
8. WARNING! TO PREVENT  
ELECTRIC SHOCK, never use the  
iron in a location where it can fall  
or be pulled into water or any  
other liquid. If the iron falls into  
water or any other liquid, unplug it  
immediately. DO NOT reach into  
the water or liquid.  
MINIMUM  
STEAM  
MAXIMUM  
STEAM  
STEAM  
CONTROL  
0
BURST OF  
STEAM  
SPRAY  
9
2
 
GETTING TO KNOW YOUR RETRACTABLE CORD IRON  
OPERATING INSTRUCTIONS (CONT.)  
Before using your EURO-PRO Select  
Retractable Cord Iron, remove any  
labels, stickers or tags that may be  
attached to the body or soleplate of the  
iron.  
When turned on for the first time, your  
new iron may emit an odor for up to 10  
minutes. This is due to the initial  
heating of the materials used in making  
the iron.  
The odor is safe and should not reoccur  
after initial heating.  
SELF CLEANING  
STORAGE  
It is important to “Self Clean” the iron at  
least every two weeks to remove scale,  
calcium, etc. The harder the water, the  
more often the iron should be self  
cleaned.  
1. Always turn the variable steam  
control to “No steam position” after  
you have emptied the water tank.  
Also, before ironing with steam for the  
first time, allow iron to heat, hold in a  
horizontal position and hit the burst of  
steam button several times. The iron  
may emit some small particles from the  
steam holes. This is normal and will  
clear after pressing the burst of steam  
button several times.  
2. Stand the iron in the vertical  
position to cool down before storing.  
1. Set the variable steam control to  
position “No steam position”.  
3. Always store the iron in the upright  
position to protect the soleplate.  
2. Fill the water tank up to the “MAX”  
level.  
4. From time to time, clean the exterior  
of the iron with a damp cloth and  
wipe dry.  
3. Stand the iron in the vertical position.  
Plug the iron into the electrical outlet  
and wait until the iron heats up and  
thermostat light goes off and then  
comes on again.  
5. If you use spray starch, wipe the  
soleplate occasionally with a soft  
damp cloth to prevent the build-up of  
deposits.  
4. Hold the iron horizontally over the  
sink and slide the variable  
6. If the iron has not been used for a  
few weeks, hold the iron horizontally  
and allow to steam for 2 minutes  
before ironing.  
steam control lever to the “Self  
Clean” zone. “  
See Figure 6.  
NOTE: The anti drip function reduces  
water dripping and water stains. It does  
not prevent water dripping and water  
stains if you press the steam burst  
button too often or if the temperature is  
too low. The amount of water droplets  
will eventually decrease after the iron is  
used for 2 to 3 tankfuls of steaming and  
ironing.  
6. Boiling water and steam will now be  
ejected from the holes in the  
soleplate. The impurities and scale  
are washed away with it.  
1. Spray Nozzle  
2. Water Filling Inlet  
3. Variable Steam Control  
4. Burst of Steam Button  
5. Spray Button  
6. Thermostat Light  
7. Cord Winder  
8. Temperature Control Dial  
9. Transparent Water Tank  
10.Soleplate  
11.Cord Rewind Button  
12.Power Cord  
See Figure 7.  
7. Move the iron back and forth as this  
happens.  
8. Slide the variable steam control lever  
to the “No steam position” position  
after one minute or when the water  
tank is empty.  
9. Place the iron back in the vertical  
position to cool down before storing.  
13.Water Flask  
Figure 7  
Technical Specifications  
CAUTION: Hold the plug when  
rewinding the cord. Do not allow  
the cord to whip when rewinding.  
Voltage:  
Power:  
120V., 60Hz.  
1400 watts  
Figure 6  
3
8
 
OPERATING INSTRUCTIONS (CONT.)  
FEATURES OF EURO-PRO SELECT RETRACTABLE  
CORD IRON  
SELECTING IRON  
EMPTYING THE IRON  
TEMPERATURES  
1. Always empty iron after each use.  
Always read garment labels and follow  
the manufacturer’s ironing instructions.  
Refer to the “Ironing Chart” on page 11  
for temperature recommendations:  
2. When finished using the iron, turn  
the variable steam control to “No  
steam position” and the temperature  
control dial to “MIN”.  
Use low settings for synthetics.  
3. Unplug the iron from the electrical  
outlet.  
4
•• Use moderate settings for wool,  
silks, and blends.  
4. Set variable steam control to “MAX”.  
••• Use high settings for cottons and  
linens.  
5. Turn the iron upside down over the  
sink with the tip pointing downward  
and allow the water to flow from the  
opening.  
IRONING HINTS  
6. Set variable steam control to “No  
steam position”.  
WARNING! To prevent fire, do not  
leave iron unattended while  
connected.  
7. Stand the iron in the vertical  
position to cool down before storing.  
Sort articles to be ironed according  
to the type of fabric. This will reduce  
the need to adjust the temperature  
for different types of garments.  
5. WATER FILLING INLET  
The cover prevents dust and  
foreign matter from entering the  
water tank. It also stops any water  
from spilling during ironing.  
1. BLAST OF STEAM BUTTON  
Pressing this Button provides a  
powerful blast of steam without  
dripping water.  
WARNING! Use caution when  
emptying the iron. Burns may occur  
from touching hot metal surfaces,  
hot water or steam.  
If you are not sure of the fiber  
content of a garment, test a small  
area such as a seam or inside hem  
section before ironing a visible area.  
Start with a low temperature setting  
and gradually increase to find the  
best setting.  
2. ATOMIZER SPRAY  
BUTTON  
6. RETRACTABLE CORD  
Cord retracts quickly into a  
convenient base.  
ELECTRONIC AUTOMATIC  
SHUT-OFF  
Pressing this Button provides a  
defined jet of spray which gently  
moistens fabric.  
Your Retractable Cord Iron is equipped  
with an electronic auto shut-off. The  
CAUTION: Hold the plug when  
rewinding the cord. Do not allow  
the cord to whip when rewinding.  
electronic auto-off switches the iron off if it  
has been standing in the vertical position  
unmoved for approximately 8 minutes. A  
red light will flash when the iron switches  
itself off. To switch the iron back on, just  
shake the iron side-to-side several times.  
When reducing the temperature to  
iron sensitive fabrics, allow  
approximately 2 minutes for the iron  
to cool to the new temperature  
setting.  
3. ADJUSTABLE STEAM  
CONTROL  
For selecting dry ironing, slide lever  
down. For steam ironing, gradually  
slide lever up to increase the  
amount of steam.  
7. ELECTRONIC AUTOMATIC  
SHUT-OFF  
Fabrics such as velour, wool, linen  
and silk are best ironed with an  
ironing cloth to prevent shine marks.  
Your Retractable Cord Iron is  
equipped with an electronic auto  
shut-off. The electronic auto-off  
switches the iron off if it has been  
standing in the vertical position  
unmoved for approximately 8  
minutes.  
WARNING! Never rely on the auto  
shut-off to turn your iron OFF.  
Never leave the iron plugged in and  
unattended for any length of time.  
4. TEMPERATURE DIAL  
Turn dial to select  
temperature. Main  
temperature settings are  
indicated by the 1, 2 and 3  
dots. (See “Ironing Chart.”)  
WARNING! Never rely on the auto  
shut-off to turn your iron OFF.  
Never leave the iron plugged in and  
unattended for any length of time.  
7
4
 
OPERATING INSTRUCTIONS  
OPERATING INSTRUCTIONS (CONT.)  
This appliance is for HOUSEHOLD USE  
4. Turn the temperature dial to any of  
WARNING! Before filling the iron  
with water, be sure the iron is not  
plugged into the electrical outlet. The  
iron may be filled with water while it  
is hot.  
2. Set the temperature dial to the  
"MAX" position. Place the iron on a  
stable surface and allow it to heat for  
approximately 2 minutes.  
ONLY and may be plugged into any  
120V AC polarized electrical outlet. Do  
not use any other type of outlet.  
the temperatures within the gray  
steam band and allow the iron to  
heat for approximately 2 minutes  
before ironing. Place iron on a  
stable, protected surface while the  
iron is warming to the desired  
temperature.  
3. With the iron in a horizontal position,  
press the burst of steam button  
several times to prime the pump.  
See Figure 4.  
DRY IRONING  
WARNING! TO PREVENT THE RISK  
OF BURNS, use caution when filling  
iron with water. Burns can occur  
from touching hot metal parts, hot  
water, or steam.  
All marked settings on the temperature  
dial can be used for dry ironing. Slide  
the variable steam control lever all the  
down as shown in Figure 1. This will cut  
off the steam flow if water is in the tank.  
5. Slide the steam lever up to increase  
the amount of steam. When using  
extra steam, the iron uses more  
water and it may be necessary to fill  
the tank more often. See Figure 3.  
NOTE: Because of the soleplate design,  
ordinary tap water may be used with this  
iron. However, in very hard water areas,  
we recommend using distilled or  
demineralized water.  
For Dry Ironing:  
For Steam Ironing:  
CAUTION: Never fill the iron with  
fabric conditioner, starches or any  
other liquid, as these will damage the  
steam mechanism. Do not use  
contaminated water.  
Figure 4  
NOTE: If the tank runs dry, remove the  
plug from wall outlet. Then, fill the iron  
with water and re-prime the pump. The  
iron may be filled with water while it is  
hot.  
1. Turn temperature dial to “MIN” and  
slide lever all the way down.  
WATER SPRAY  
Figure 1  
1. Turn temperature dial to “MIN” and  
slide the variable steam control lever  
all the way down to "0" mark.  
2. Holding the iron at a slight angle,  
pour water slowly into the water  
filling inlet. See figure 2. Fill tank to  
desired level or to the “MAX” water  
level marking using the water filling  
flask. (When the iron is upright, the  
transparent water tank allows you to  
gauge the amount of water.) DO  
NOT overfill the tank.  
The water spray is useful on fabrics with  
stubborn wrinkles. Press the spray  
button and a jet of water will spray onto  
the fabric being ironed. See Figure 5.  
The water spray can be used with dry or  
steam ironing as desired.  
Figure 3  
BURST OF STEAM  
2. Plug the cord into a polarized, 120V  
AC electrical outlet. The power “ON”  
light will come on, indicating that the  
iron is receiving power.  
WARNING! DO NOT aim iron at face,  
towards yourself, or anyone else  
while using or adjusting steam.  
Burns or serious injury may occur.  
3. Turn the temperature dial to the  
desired setting. (See “Ironing Guide”  
for a guide to temperature selection.)  
The burst-of-steam button is useful  
when ironing denim, cotton, and linens.  
It provides extra, sudden blasts of  
steam which aid in removing stubborn  
wrinkles.  
4. Place iron vertically on a stable,  
protected surface while iron is  
warming to desired temperature.  
The burst-of-steam feature can be used  
with Dry or Steam ironing as desired.  
STEAM IRONING  
Figure 5  
WARNING! DO NOT aim iron at face,  
towards yourself, or anyone else  
while using or adjusting steam.  
Burns or serious injury may occur.  
1. Make sure the water tank is at least  
1/2 filled with water.  
Figure 2  
3. Plug the cord into a polarized, 120V  
AC electrical outlet.  
5
6
 

Earthquake Sound Car Amplifier T1000W 2 User Manual
Eclipse Fujitsu Ten GPS Receiver AVN6600 User Manual
Euro Pro Hot Beverage Maker EK119H User Manual
Everpure Water System EV9337 11 User Manual
Fujitsu Server RXI300 User Manual
Gaggenau Refrigerator 235 User Manual
GE Cordless Telephone 15433020 User Manual
Gefen Flat Panel Television GTV ETH 2COAX User Manual
Gefen Stereo Amplifier EXT AVSCALER PRO User Manual
Gitzo Camcorder Accessories G2227 User Manual