Euro Pro Iron EP480H2 User Manual

EP480H2  
LIMITED WARRANTY  
ONE (1) YEAR LIMITED WARRANTY  
EURO-PRO Operating LLC warrants this product to be free from defects in material and  
workmanship for a period of one (1) year from the date of the original purchase, when utilized for  
normal household use, subject to the following conditions, exclusions and exceptions.  
Pro Iron  
If your appliance fails to operate properly while in use under normal household conditions within  
the warranty period, return the complete appliance and accessories, freight prepaid to  
EURO-PRO Operating LLC, 94 Main Mill Street, Door 16, Plattsburgh, NY 12901  
If the appliance is found to be defective in material or workmanship, EURO-PRO Operating LLC  
will repair or replace it free of charge. Proof of purchase date and $ 9.95 to cover the cost of return  
shipping and handling must be included. *  
OWNER’S MANUAL  
120 V., 60 Hz, 1600 Watt  
Model EP480H2  
The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or replacement  
of the unit at our option. This warranty does not cover normal wear of parts and does not apply to  
any unit that has been tampered with or used for commercial purposes. This limited warranty does  
not cover damage caused by misuse, abuse, negligent handling or damage due to faulty  
packaging or mishandling in transit. This warranty does not cover damage or defects caused by  
or resulting from damages from shipping or repairs, service or alterations to the product or any of  
its parts, which have been performed by a repair person not authorized by EURO-PRO Operating  
LLC.  
This warranty is extended to the original purchaser of the unit and excludes all other legal and/or  
conventional warranties. The responsibility of EURO-PRO Operating LLC if any, is limited to the  
specific obligations expressly assumed by it under the terms of the limited warranty. In no event is  
EURO-PRO Operating LLC liable for incidental or consequential damages of any nature  
whatsoever. Some states do not permit the exclusion or limitation of incidental or consequential  
damages, so the above may not apply to you.  
This warranty gives you specific legal rights, and you may also have other rights which vary from  
province to province.  
*Important: Carefully pack item to avoid damage in shipping. Be sure to include proof of  
purchase date and to attach tag to item before packing with your name, complete address  
and phone number with a note giving purchase information, model number and what you  
believe is the problem with item. We recommend you insure the package (as damage in  
shipping is not covered by your warranty). Mark the outside of your package “ATTENTION  
CUSTOMER SERVICE”. We are constantly striving to improve our products, therefore the  
specifications contained herein are subject to change without notice.  
PRODUCT REGISTRATION CARD  
Please complete and return within ten (10) days of purchase. The registration will enable us to  
contact you in the event a product defect is discovered. By returning this card you acknowledge  
to have read and understood the instructions for use, and warnings set forth in the accompanying  
instructions.  
RETURN TO: EURO-PRO Operating LLC, 94 Main Mill Street, Door 16, Plattsburgh, NY 12901  
PURCHASER: ……………………………………………………………………………………………  
ADDRESS: ……………………………………………………………………………………………….  
EURO-PRO Operating LLC  
94 Main Mill Street, Door 16  
Plattsburgh, NY 12901  
EP480H2  
DATE OF PURCHASE: …………………….. ………… MODEL: ……. ……………. .…………….  
Tel.: 1 (800) 798-7398  
NAME AND ADDRESS OF STORE: …………………………………………………………………..  
Printed in China  
11  
 
IRONING CHART  
ADDITIONAL IMPORTANT SAFEGUARDS  
NOTE: Before starting to iron delicate  
To select iron temperature, align  
temperature selected on dial with  
the indicator on the water tank.  
fabrics, it is best to first test the  
temperature of the iron on a hem or an  
inside seam.  
1. Do not rest iron on soleplate.  
9. CAUTION: Never use scouring  
pads, abrasive or chemical  
cleaners, or solvents to clean the  
exterior or soleplate of your iron.  
Doing so will scratch and/or  
damage the surface.  
2. Never use or rest iron on an  
unstable surface.  
3. While the iron is hot, never set iron  
on an unprotected surface - even if it  
is on its heel rest.  
10. WARNING! DO NOT aim iron at  
face, towards yourself, or anyone  
else while using or adjusting  
steam. Burns or serious injury  
may occur.  
DIRECTIONS  
ON LABEL  
4. WARNING! TO PREVENT  
ELECTRIC SHOCK OR OTHER  
INJURY, before filling the iron  
with water, make sure that the  
plug is removed from the outlet.  
SYNTHETIC  
11. Always store your iron in the upright  
position, not on the soleplate. If  
stored face down, even the  
smallest amount of moisture will  
cause the soleplate to corrode and  
stain.  
FIBERS, e.g.  
acrylic, nylon  
polyester  
5. CAUTION: Never fill the iron with  
fabric conditioner, starches or any  
other solution, as these will  
SILK  
COTTON  
LINEN  
FABRIC  
WOOL  
damage the steam mechanism. Do  
not use contaminated water.  
6. WARNING! TO AVOID FIRE, never  
leave iron unattended while it is  
plugged in.  
12. DANGER! Never use the iron if it  
is damaged or dropped. Using  
the iron when it is damaged  
TEMP.  
CONTROL  
MIN  
MAX  
7. WARNING! TO PREVENT  
ELECTRIC SHOCK, never  
immerse the iron in water or other  
liquid.  
could create the risks of fire,  
electric shock, injury or death.  
• • • • •  
MINIMUM MAXIMUM  
8. WARNING! TO PREVENT  
ELECTRIC SHOCK, never use the  
iron in a location where it can fall  
or be pulled into water or any  
other liquid. If the iron falls into  
water or any other liquid, unplug it  
immediately. DO NOT reach into  
the water or liquid.  
STEAM  
CONTROL  
0
STEAM  
STEAM  
BURST OF  
STEAM  
SPRAY  
2
9
 
GETTING TO KNOW YOUR IRON  
USER MAINTENANCE INSTRUCTIONS  
Before using your 1600 Watt Pro Iron,  
The odor is safe and should not reoccur  
after initial heating.  
EMPTYING THE IRON  
ANTI-DRIP FEATURE  
remove any labels, stickers or tags that  
may be attached to the body or  
soleplate of the iron.  
When turned on for the first time, your  
new iron may emit an odor for up to 10  
minutes. This is due to the initial  
heating of the materials used in making  
the iron.  
1. Always empty iron after each use.  
2. When finished using the iron, turn  
the variable steam control to“0” and  
the temperature control dial to "MIN".  
3. Unplug the iron from the electrical  
outlet.  
Built-in Anti-Drip feature helps reduce  
water spots by cutting of water flow  
when the iron temperature is too low to  
build sufficient steam. The anti drip  
function reduces water dripping and  
water stains. It does not prevent water  
dripping and water stains if you press  
the steam burst button too often or if the  
temperature is too low. The amount of  
water droplets will eventually decrease  
after the iron is used for 2 to 3 tankfuls  
of steaming and ironing.  
Also, before ironing with steam for the  
first time, allow iron to heat, hold in a  
horizontal position and hit the burst of  
steam button several times. The iron  
may emit some small particles from the  
steam holes. This is normal and will  
clear after pressing the burst of steam  
button several times.  
4. Set variable steam control to "MAX".  
5. Turn the iron upside down over the  
sink with the tip pointing downward  
and allow the water to flow from the  
opening.  
6. Set variable steam control to "0".  
7. Allow iron to cool in an upright  
position before storing.  
STORAGE  
1. Always turn the variable steam  
control to “0” after you have  
emptied the water tank.  
2. Allow the iron to cool down.  
3. Always store the iron in the upright  
position to protect the soleplate.  
4. From time to time, clean the exterior  
of the iron with a damp cloth and  
wipe dry.  
5. If you use spray starch, wipe the  
soleplate occasionally with a soft  
damp cloth to prevent the build-up of  
deposits.  
6. If the iron has not been used for a  
few weeks, hold the iron horizontally  
and allow to steam for 2 minutes  
before ironing.  
WARNING! Use caution when  
emptying the iron. Burns may  
occur from touching hot metal  
surfaces, hot water or steam.  
SELF-CLEANING  
12  
In order to remove calcium and built-up  
particles, the self-cleaning system should be  
run at least once a month.  
• Fill the water beaker provided halfway  
and then pour into the water reservoir.  
• Set the variable steam control to the no  
steam position.  
• Insert the main plug into the wall socket.  
• Set the temperature control dial to the  
maximum temperature.  
• Wait until the thermostat light goes off and  
steam iron has reached preset  
temperature.  
WARNING: The anti-drip  
function reduces water  
• Remove the plug from the wall socket.  
• Hold the steam iron horizontally over a  
sink.  
dripping and water stains. It  
does not prevent water  
dripping or water stains if you  
press the steam burst button  
too often or if temperature is  
too low. The amount of water  
droplets will eventually  
decrease after iron is used for  
2 to 3 tankfuls of steaming  
and ironing.  
• Turn the variable steam control to  
“Self-Clean  
” position. Hot water and  
steam will be emitted from the soleplate.  
Swing the steam iron lightly back and forth  
gently to allow lime and dust particles to  
come out.  
• When the water reservoir is empty, shift  
the variable steam control from “Self-  
Clean” position to “0”.  
1. Power Supply Cord  
2. Auto Shut-Off Light  
3. Temperature Ready Light  
4. Variable Steam Control  
5. Burst of Steam  
8. Spray Nozzle  
9. Temperature Control Dial  
10. Water Level Window  
11. Stainless Steel Soleplate  
12. Water Flask  
6. Spray Button  
7. Water Filling Inlet Cover  
13. Iron Heel Rest  
• Stand the iron upright and insert the plug  
into the wall socket to let the iron heat up  
again.  
• Move the iron over a clean cotton cloth to  
clean the soleplate and let the remaining  
water on the soleplate evaporate.  
Technical Specifications  
Voltage:  
Power:  
120V., 60Hz.  
1600 Watts  
3
8
 
OPERATING INSTRUCTIONS (CONT.)  
FEATURES OF YOUR PRO IRON  
NOTE: If the tank runs dry, remove the  
NOTE: Before starting to iron delicate  
1. BLAST OF STEAM  
6. WATER FILLING INLET  
The cover prevents dust and  
foreign matter from entering  
the water tank. It also stops  
any water from spilling during  
ironing.  
plug from wall outlet. Then, fill the iron  
with water and re-prime the pump. The  
iron may be filled with water while it is  
hot.  
fabrics, it is best to first test the  
temperature of the iron on a hem or  
an inside seam.  
The Blast of Steam provides  
extra, sudden blasts of steam  
which aid in removing stubborn  
wrinkles from fabrics such as  
denim, cotton or linen.  
AUTOMATIC SHUT-OFF  
4. For vertical steam,  
press the blast of  
steam button while  
holding the iron  
in a vertical  
The auto shut-off safety function of your  
Pro Iron is designed to engage after  
approx. 7 minutes of non-use. The auto  
shut-off indicator light will flash when the  
auto shut-off has activated. To reset your  
iron and continue ironing follow these  
steps. See figure 9.  
2. ATOMIZER SPRAY  
BUTTON  
7. BUILT-IN ANTI-CALCIUM  
FILTER  
position. See  
figure 5. The  
vertical steam  
Pressing this Button provides a  
defined jet of spray which gently  
moistens fabric.  
Prevents calcium build-up  
and prolongs the life of the  
iron.  
1) Lift the iron.  
function is useful  
for steaming  
curtains and  
2) Holding the iron horizontally in front of  
you, gently rock the iron back and  
forth several times. This motion will  
reset the safety switch inside the iron.  
Do Not Shake the Iron.  
The red temperature ready light will  
illuminate when the auto shut-off system  
has been reset. Allow time for the iron to  
re-heat. The red temperature indicator  
light will go out when the iron is ready for  
use.  
Fig. 5  
3. VARIABLE STEAM  
CONTROL  
8. STAINLESS STEEL  
SOLEPLATE  
drapes while still hanging.  
Minimum to maximum steaming for  
different materials. Self cleaning  
feature flushes internal sole plate  
with water.  
Provides maximum glide-  
ability and heat retention.  
WATER SPRAY  
The water spray is  
useful on fabrics  
with stubborn  
wrinkles. Press the  
spray button and a  
jet of water will  
9. PIVOT CORD  
For left or right handed use.  
Pivots up and down;  
prevents dragging along the  
fabric. The flexible cord  
protector protects the cord  
from fraying.  
4. TEMPERATURE CONTROL  
Turn dial to select temperature.  
Main temperature settings are  
indicated by the 1, 2 and 3  
spray onto the  
fabric being ironed.  
Fig. 6  
See Figure 6. The water spray can be  
used with dry or steam ironing as  
desired.  
dots. (See “Ironing Chart.”)  
Fig. 9  
SELECTING IRON TEMPERATURES  
5. ANTI-DRIP FUNCTION  
Built-in Anti-Drip feature  
Always read garment labels and follow  
the manufacturer's ironing instructions.  
Refer to the "Ironing Chart" on page 9  
for temperature recommendations: See  
figures 7 & 8.  
IRONING HINTS  
10. SELF-CLEANING  
Flushes internal soleplate  
with water.  
WARNING! To prevent fire, do  
not leave iron unattended while  
connected.  
helps reduce water spots by  
cutting of water flow when  
the iron temperature is too  
low to build sufficient steam.  
Sort articles to be ironed according  
to the type of fabric. This will reduce  
the need to adjust the temperature  
for different types of garments.  
If you are not sure of the fiber  
content of a garment, test a small  
area such as a seam or inside hem  
section before ironing a visible area.  
Start with a low temperature setting  
and gradually increase to find the  
best setting.  
Use low settings for synthetics.  
•• Use moderate settings for wool,  
silks, and blends.  
••• Use high settings for cottons and  
linens.  
Variable Steam Control  
When reducing the temperature to  
iron sensitive fabrics, allow  
approximately 2 minutes for the iron  
to cool to the new temperature  
setting.  
Fabrics such as velour, wool, linen  
and silk are best ironed with an  
ironing cloth to prevent shine marks.  
Fig. 7  
Fig. 8  
4
7
 
OPERATING INSTRUCTIONS  
OPERATING INSTRUCTIONS  
1. Turn temperature dial to "MIN" and  
6. Steam is produced as soon as the  
This appliance is for HOUSEHOLD USE  
ONLY and may be plugged into any  
120V AC polarized electrical outlet. Do  
not use any other type of outlet.  
1. Turn temperature dial to "••" or "•••"  
and slide lever all the way to the left.  
slide the variable steam control lever  
all the way down to "0".  
2. Plug the cord into a polarized, 120V  
AC electrical outlet. The power "ON"  
light will come on, indicating that the  
iron is receiving power.  
3. Turn the temperature dial to the  
desired setting. (See "Ironing Guide"  
for a guide to temperature selection.)  
4. Place iron on its heel (on a stable,  
protected surface) while iron is  
iron is held in the horizontal position.  
Steam will stop coming out when the  
iron is put on its heel in a vertical  
position or by turning the steam  
control dial to "0".  
2. Holding the iron at a slight angle,  
pour water slowly into the water  
filling inlet. See figure 2. Fill tank to  
desired level or to the “MAX”  
BEFORE FIRST USE  
Remove any labels, stickers or tags  
which may be attached to the body or  
the soleplate of the iron before using  
the iron.  
Before you start using your iron, read all  
the instructions in the manual and do  
the following in order to eliminate any  
odor and small white residue particles  
and to ensure optimum steam  
performance.  
BLAST OF STEAM  
water level marking using the water  
filling flask. (When the iron is upright,  
see-through water tank allows you to  
gauge the amount of water.) DO  
NOT overfill the tank.  
WARNING! DO NOT aim iron  
at face, towards yourself, or  
anyone else while using or  
adjusting steam. Burns or  
serious injury may occur.  
warming to desired temperature.  
The blast-of-steam button is useful  
when ironing denim, cotton, and linens.  
It provides extra, sudden blasts of  
steam which aid in removing stubborn  
wrinkles.  
STEAM IRONING  
CAUTION! DO NOT aim iron  
at face, towards yourself, or  
anyone else while using or  
adjusting steam. Burns or  
serious injury may occur.  
1. Fill the iron with regular tap water.  
(See page 6 for filling instructions.)  
2. Set the temperature control dial to its  
highest setting and the variable  
steam control to “0”.  
3. When the temperature ready light  
goes off, the iron has reached the  
selected temperature. Set the  
variable steam control to the highest  
setting.  
4. Keep the iron in a horizontal position  
and allow it to steam until the water  
runs out. Press the blast of steam  
button to eliminate white residue  
particles.  
5. Repeat this procedure for two or  
three fillings of water.  
The blast-of-steam feature can be used  
with Dry or Steam ironing as desired.  
1. Make sure the water tank is at least  
1/2 filled with water.  
2. Set the temperature dial. Place the  
iron on its heel (on a stable,  
protected surface) and allow it to  
heat for approximately 2 minutes.  
3. With the iron in a horizontal position,  
press the blast of steam button  
several times to prime the pump.  
See Figure 4.  
WARNING! Before filling the  
iron with water, be sure the  
iron is not plugged into the  
electrical outlet. The iron may  
be filled with water while it is  
hot.  
Fig. 2  
3. Plug the cord into a polarized, 120V  
AC electrical outlet.  
4. Turn the temperature dial to any of  
the temperatures within the red  
steam band and allow the iron to  
heat for approximately 2 minutes  
before ironing. Place iron on its  
heel (on a stable, protected  
CAUTION! TO PREVENT THE  
RISK OF BURNS, use caution  
when filling iron with water.  
Burns can occur from touching  
hot metal parts, hot water, or  
steam.  
surface) while the iron is warming to  
desired temperature.  
DRY IRONING  
5. Slide the steam lever up to increase  
the amount of steam. (See figure 3)  
When using extra steam, the iron  
uses more water and it may be  
necessary to fill the tank more often.  
See page 6 for refilling the iron with  
water.  
All marked settings on the temperature  
dial can be used for dry ironing. Slide  
the variable steam control lever all the  
way down as shown in Figure 1. This  
will cut off the steam flow if water is in  
the tank.  
NOTE: Because of the soleplate design,  
ordinary tap water may be used with this  
iron. However, in very hard water areas,  
we recommend using distilled or  
demineralized water.  
Fig. 4  
For Dry Ironing:  
WARNING: Never fill the iron  
with fabric conditioner,  
For Steam Ironing:  
starches or any other liquid, as  
these will damage the steam  
mechanism. Do not use  
0
0
contaminated water.  
Fig. 1  
Fig. 3  
5
6
 

EdgeStar Lawn Mower AP450Z User Manual
ELAN Home Systems Home Theater Server Digital Music Server User Manual
Fellowes Paper Shredder DS 16Ci User Manual
FieldServer Computer Drive FS 8707 06 User Manual
GE Answering Machine 2 9975 User Manual
GE Car Stereo System WWSE5240DCC WW User Manual
Gefen TV Cables EXT DVI FM2000 User Manual
GE Microwave Oven SES0732 User Manual
GE Telephone 16224640 User Manual
GE Vacuum Cleaner 106575 User Manual