Euro Pro Blender BP101H3 User Manual

QUAD BLADE FOOD PROCESSOR  
OWNER’S MANUAL  
Model BP101H3  
120V., 60Hz., 600 Watts  
EURO-PRO Operating LLC  
94 Main Mill Street, Door 16  
Plattsburgh, NY 12901  
Tel.: 1 (800) 798-7398  
 
CLEANING & MAINTENANCE  
IMPORTANT SAFEGUARDS  
When using electrical appliances, basic safety precautions should always be  
followed, including the following:  
Read Instruction Manual Before Use  
CAUTION: Make sure that the unit is unplugged from power source and control  
button is on “OFF” before inserting or removing any attachments and  
before cleaning.  
1. Read all instructions before using  
the appliance. It is suggested  
that you keep these instructions  
in a safe place for future  
9. Do not use outdoors.  
10. Do not let cord hang over edge of  
table or counter or touch hot  
surfaces.  
Never immerse the unit, cord or plug  
in water or any other liquid.  
Clean the main unit with a damp  
cloth only.  
Only the stainless steel blades can  
be washed in the dishwasher.  
All other parts can be cleaned in  
warm sudsy water using regular  
dishwashing liquid.  
If food has spilled over on to the  
main unit, use the pointy end of the  
spatula to clean the cracks and  
crevices of the base under the food  
processor bowl. (Fig. 16)  
Re-settable Thermal Safety  
Device  
Your Food Processor has been  
designed with a unique safety system  
which prevents damage to the unit’s  
motor and drive system, should you  
inadvertently overload your appliance.  
The safety system will automatically cut  
the electric power to the appliance  
when the device senses an overload or  
excessive temperature in the motor or  
drive system. Should this occur during  
use and the appliance stops  
reference.  
11. Keep hands and utensils away  
from moving blades or discs  
while processing food to reduce  
the risk of severe injury to  
persons or damage to the food  
processor. A scraper may be  
used but must be used only when  
the food processor is not running.  
12. Blades are sharp. Handle  
carefully. When handling the  
chopper blade always hold it by  
the plastic hub.  
13. To reduce the risk of injury, never  
place cutting blades or discs on  
the base without first putting bowl  
properly in place.  
14. Be certain cover is securely  
locked in place before operating  
appliance.  
2. Your voltage must correspond to  
the voltage printed on the bottom  
of the appliance.  
3. To protect against electrical  
shock, do not immerse the motor  
housing (base), cord, or plug in  
water or other liquid.  
4. Close supervision is necessary  
when the appliance is used by or  
near children.  
5. Unplug appliance from outlet  
when not in use, before putting  
on or taking off parts and before  
cleaning.  
functioning, follow the re-setting  
procedure below:  
1. Turn the “ON/OFF” speed control  
to the “OFF” position  
2. Unplug the unit from the wall  
receptacle.  
3. Remove and empty the processor  
bowl. Ensure that no food is  
jamming the cutting blades or  
attachments.  
6. Avoid touching moving parts at  
all times.  
7. Do not operate the appliance with  
a damaged cord or plug, or after  
the appliance malfunctions, has  
been dropped or damaged in any  
manner. Return the appliance to  
EURO-PRO Operating LLC for  
examination, repair, electrical or  
mechanical adjustment.  
Fig. 16  
4. Allow the appliance to cool down  
for a minimum of 30 minutes.  
5. Re-install the processor bowl and  
re-plug appliance in the wall outlet.  
6. Proceed to use the appliance as  
before. Should the appliance still  
fail to operate, turn the “ON/OFF”  
speed control to the “OFF” position  
and unplug from the wall outlet.  
Allow the appliance to cool down  
for an additional 1 to 2 hours. After  
this time has passed, repeat the  
restart procedure, steps 5 and 6  
above.  
15. Never feed food by hand. Always  
use food pusher.  
16. Do not attempt to by-pass the  
cover interlock mechanism.  
17. Always operate food processor  
with the cover in place.  
Hints & Tips:  
The double chopping blade can be  
used for chopping meat, fish,  
vegetables, cheese, etc. setting  
the speed to maximum.  
For finer chopping, increase the  
length of time you process.  
For coarser chopping, use the pulse  
button for a few seconds and monitor  
food texture.  
Pre-cut larger pieces to make them fit  
into the feed tube. When chopping  
hard foods (e.g. meat, cheese) cut  
into 1 “/2.4 cm cubes.  
8. The use of attachments including  
canning jars not recommended  
by the manufacturer may cause  
fire, electric shock or injury to  
persons.  
18. Always remove protective blade  
cover(s) before use. Protective  
blade covers to be used only for  
storage.  
IMPORTANT NOTICE  
This appliance has a polarized plug (one blade is wider than the other). To  
reduce the risk of electrical shock, this plug will fit in a polarized outlet only  
one way. If the plug does not fit fully in the outlet, reverse the plug. If it still  
does not fit, contact a qualified electrician. Do not modify the plug in any way.  
For shredding, place food horizontally  
into the feed tube, for slicing place the  
food vertically.  
SAVE THESE INSTRUCTIONS  
FOR HOUSEHOLD USE ONLY  
REV. 05/05  
8
1
 
OPERATING INSTRUCTIONS  
Congratulations! As the owner of a new BRAVETTI Quad Blade Food Processor,  
you are about to use a very versatile and powerful kitchen appliance that will quickly  
become an indispensable item in your kitchen. BRAVETTI products are engineered  
to meet the highest quality standards and are designed to offer the ultimate in ease  
of operation and convenience.  
Processing Examples  
IMPORTANT INFORMATION  
Please read all the following instructions carefully.  
THIN SLICING  
THICK SLICING  
FINE SHREDDING  
COARSE SHREDDING  
IMPORTANT  
For thin slicing:  
-
-
-
Recommended speed level is High  
For your protection, the BRAVETTI Quad Blade Food Processor has a double safety  
switch so that it cannot run unless the food processor lid is locked in place. Never  
attempt to defeat the food processor lid interlock.  
(Cucumbers, raw potatoes, lettuce, carrots)  
Recommended speed level is High  
(Cabbage, carrots, onions)  
Recommended speed level is High  
(Carrots, cucumbers, cabbage)  
For coarse slicing:  
For fine shredding:  
To operate the food processor, the safety cover must be properly locked in place.  
For coarse shredding: - Recommended speed level is High  
(Lettuce, carrots, apples)  
WARNING: Always  
close the safety cover  
when using the food  
processor.  
IMPORTANT: Remove chopping blade protective  
cover(s) before use. Protective blade cover(s) to be  
used only for storage.  
2
7
 
OPERATING INSTRUCTIONS  
GETTING TO KNOW FOOD PROCESSOR  
Dough Blade  
Slicing & Shredding Blades  
CAUTION: Make sure that the unit is  
unplugged from the power source and  
the operating button is in the “OFF”  
position before inserting or removing  
attachments.  
1. Make sure that the blade storage  
cover is closed during use.  
2. Fit the processor bowl and spindle as  
described previously on page 4.  
3. Fit the dough blade over the spindle  
and press firmly into place. (Fig. 8)  
4. Place the ingredients into the bowl.  
5. Fit the lid and click into place as  
described in the “Setting Up” section  
(page 4).  
CAUTION: Make sure that the unit is  
unplugged from the power source and  
the operating button is “OFF” before  
inserting or removing attachments.  
1. Make sure that the blade storage  
cover is closed during use.  
2. Place the blade of your choice on  
the blade holder. Inserting the longer  
tab on the side of the blade first.  
(Fig. 9)  
3. Press the other end of the blade until  
it clicks into place. (Fig. 10)  
4. Fit the processor bowl and spindle  
as detailed on the page 4.  
5. Using the finger holes in the blade  
holder, fit it over the spindle and  
press firmly into place as indicated.  
(Fig. 11)  
WARNING: USE EXTREME  
CAUTION WHEN HANDLING  
BLADES. BLADES ARE SHARP.  
6. Fit the lid and click into place as  
described in the Setting Up section  
(page 4).  
6. Insert food pusher and then plug in  
the food processor.  
7. Turn the food processor on selecting  
high speed. Maximum capacity for  
processing dough is based on the  
mixture of 21 oz. (600 g.) of flour and  
14 oz. (400 g.) of water in order to  
obtain 2.2 Lbs. (1 kg.) of dough.  
8. Recommended speed for making  
dough is high.  
9. When it is time to knead the dough,  
place speed control dial in the "Off"  
position and pulse until the dough is  
ready.  
1. Blade Storage Cover  
2. Blade Storage  
3. Blade Access Button  
4. On/Off Speed Control  
5. Pulse/Turbo Button  
6. Main Unit  
7. Spindle  
8. Processor Bowl  
9. Processor Lid  
12. Double Chopping Blade  
13. Chopping Blade Cover  
14. Dough Blade  
15. Thin Shredding Blade  
16. Thick Shredding Blade  
17. Thin Slicing Blade  
18. Thick Slicing Blade  
19. Blade Holder  
7. Plug in the processor.  
8. WARNING: USE THE FOOD  
PUSHER TO ADD FOOD INTO  
THE PROCESSOR BOWL  
10. Remove the blade from the bowl  
before removing the dough.  
WHEN KNEADING DOUGH, DO NOT  
OPERATE THE MACHINE LONGER  
THAN 20 SECONDS. AFTERWARDS  
WAIT AT LEAST 2 MINUTES BEFORE  
OPERATING THE MACHINE AGAIN.  
FOR SAFETY, ALWAYS LEAVE THE  
PUSHER IN PLACE WHILE OPERATING  
THE PROCESSOR.  
THROUGH THE FEEDER TUBE.  
Do not overload the food processor bowl.  
In one operation, you can process a  
maximum of 6 cups (1500 ml) of food.  
20. Spatula  
10. Food Pusher  
11. Main Chopping Blade  
IMPORTANT: Remove protective blade cover(s) before use. Protective  
blade covers to be used ONLY for storage.  
Fig. 9  
Fig. 10  
Technical Specifications  
Fig. 8  
Voltage:  
Power:  
120V., 60Hz.  
600 Watts  
Capacity:  
6 Cups (1.5 Liters)  
Fig. 11  
6
3
 
OPERATING INSTRUCTIONS  
OPERATING INSTRUCTIONS  
3. Place ingredients to be processed in  
8. Keep hands and utensils away from  
the cutting blade while chopping  
food., to reduce the risk of severe  
injury to persons or damage to the  
food processor. A scraper may be  
used, but ONLY when the food  
processor is NOT running and has  
been unplugged. Never feed food by  
hand. Always use the food pusher.  
(Fig. 7)  
Using The Double Chopping Blade  
Speed Control Dial  
the bowl.  
Always disconnect unit from power  
source before cleaning or changing  
accessories.  
WARNING: USE EXTREME CAUTION  
WHEN HANDLING THE BLADES.  
THEY ARE EXTREMELY SHARP.  
ALWAYS REMOVE PROTECTIVE  
BLADE COVERS BEFORE USING.  
The food processor speed control dial  
has two speeds settings plus "Pulse" and  
"Turbo".  
1 - Low  
2 - High  
4. Then holding the processor lid by the  
feeding tube, place the processor lid  
onto the bowl and turn counter  
clockwise to lock the lid in place.  
Ensure that the lid tab has "clicked"  
into place and that the arrow on the  
lid is aligned with the dot on the unit.  
(Fig. 5 & Fig. 6)  
The speed can be adjusted while the  
food processor is in use.  
Use of the Pulse/Turbo button allows  
greater control over the texture of the  
food being processed. Use "Pulse" when  
the unit is in the "Off" position. Use  
"Turbo" when the unit is in the "On"  
position and you need a burst of power.  
Please note that the "Pulse" and "Turbo"  
is only intended to be used for short  
"bursts" of processing.  
The double chopping  
blade may be  
used with one  
Fig. 7  
Fig. 2  
blade or with  
two blades.  
1. To use as  
Fig. 6  
Fig. 5  
a double  
blade, carefully  
slip the separate  
blade over the  
shaft of the  
main blade.  
(Fig. 2 & Fig. 3)  
Double  
Blade  
Main Blade  
Operating the Food Processor  
9. When finished processing the  
ingredients, remove the processor lid  
by turning clockwise.  
10. Remove the chopping blade first  
before removing the processed food.  
FOR SAFETY, ALWAYS USE THE  
FOOD PUSHER WHEN PUTTING  
FOOD INTO THE THE FEEDER TUBE.  
NEVER FEED BY HAND.  
11. Do NOT leave the appliance  
unsupervised when it is in the "ON"  
position.  
Setting up:  
1. CAUTION: Make sure that the unit is  
unplugged from the power source and  
the the Speed control dial is in the  
"Off" position before inserting or  
removing any attachments and before  
cleaning.  
2. Place the food processor bowl onto  
the processor body. There is no need  
to turn the bowl. (Fig. 1)  
5. Insert food pusher.  
6. Plug the processor into a wall outlet.  
7. Turn the speed control dial to the  
desired speed setting.  
Fig. 3  
Two Blades  
Together  
3. When fitted correctly, the handle will  
fit into the slot at the base of the unit.  
2. Then insert onto the shaft of the  
processor bowl. Always hold the  
chopping blade by the upper plastic  
part. (Fig. 4)  
PROCESSING EXAMPLES WITH THE DOUBLE CHOPPING BLADE  
The processing times indicated below are approximate and also depend on the  
quantity of the food to be processed and the degree of fineness you require.  
RECOMMENDED  
PRODUCT  
Meat*  
QUANTITY  
OPERATION TIMES  
SPEED  
High/Turbo  
Low  
24.5 oz / 700 gr.  
24.5 oz / 700 gr.  
21 oz / 600 gr.  
24.5 oz / 700 gr.  
24.5 oz / 700 gr.  
24.5 oz / 700 gr.  
24.5 oz / 700 gr.  
4 slices  
15 - 30 seconds  
15 - 30 seconds  
15 - 30 seconds  
15 - 30 seconds  
15 - 30 seconds  
20 seconds  
Onions  
Nuts  
High  
Fig. 1  
Fish*  
Pulse  
Cheese  
Liquids (soups)  
Carrots  
Bread  
Pulse  
4. Now you are ready to use any of the  
attachments that come with the unit;  
i.e. the double chopping blade, dough  
blade, etc.  
Fig. 4  
Pulse  
pulse  
40-50 seconds  
40 - 50 seconds  
10 - 30 seconds  
10 seconds  
Low  
Apples  
24.5 oz / 700 gr.  
Max 4 bunches  
Max 4 cups/1 liter  
High  
Parsley  
Mayonnaise  
High/Turbo  
High  
30 seconds  
* Always allow food to cool before placing in the bowl.  
* Remove all bones before processing.  
4
5
 

Code Alarm Automobile Electronics CA 5051MT User Manual
Coleman Camping Equipment 2000000850 User Manual
Contec Universal Remote RT U59C User Manual
Continental Hot Beverage Maker CE23691 User Manual
Crate Amplifiers Musical Instrument Amplifier G10XL User Manual
Cuisinart Water System IB 8895A User Manual
Digi TV Converter Box MIL 170TRM User Manual
D Link Portable Media Storage DNS 320 User Manual
Dynacord Speaker System D15 3 User Manual
Fellowes Paper Shredder 460Ms User Manual